100W PD QC Power Bank Bidirectional Fast Charging Mobile Power Module DIY Power Bank 2-6S Lithium Battery Protection Motherboard
100W
$18.00
Pomiń, aby przejść do informacji o produkcie
2-6S 100W PD QC Bidirectional Fast Charging Module DIY Mobile Power Motherboard Temperature Control Electricity Display
Product selling points:
1. MPPT solar charging: intelligently tracks the maximum power point, efficiently converts solar energy, and improves charging efficiency
2. Intelligent buck boost switching: automatically adjusts voltage to prevent overcharging damage to equipment, PWM/PSM dual-mode efficient operation
3. Multiple safety protections: comprehensive protection against overcurrent, overvoltage, short circuit, and overheating, ensuring worry free use
4. PD bidirectional fast charging: supports fast charging and discharging, significantly reduces self charging time, and is more convenient to use
5. Low ripple stable output: Solid state capacitor filtering, output ripple below 9mV, effectively protecting electronic devices
Product parameters:
Wire input: 4-26V; Can connect 2-6S series batteries
USB-A: 18W output, slow charging when plugged in at the same time
Type-C: 27-100W supports input and output
Product ripple:< 9MV
Module applicable: 4.2V/4.3V/4.35V/4.5V batteries of various specifications
For example: 4.2V 18650/polymer/ternary lithium battery/lithium iron phosphate battery
Support AFC fast charging protocol
Supports FCP/SCP protocol, Huawei can fast charge or super fast charge
Support PD3.1 input/output fast charging protocol
Supports Xiaomi fast charging and can also charge tablets
Integrated QC2.0/QC3.0/C3.0+output fast charging protocol
Other devices need to support QC protocol for fast charging, otherwise they cannot
matters needing attention:
1. The wires connecting the external battery of the motherboard must be able to withstand 10A current, using at least 1 square meter of copper wire, and ordinary wires should use 1.5 square meters. Being too detailed may pose safety hazards. Due to the high current at the battery end, it is recommended to use 16AWG wire.
2. The motherboard comes with a protective chip, and the battery cannot be further protected by a protective board. If necessary, please remove the protective board and directly connect the battery cells to our motherboard. (Because the built-in ones generally cannot have excessive current, and the output power is protected as soon as it increases)
3. Due to the excessive current at the battery end, it is necessary to weld the battery with a thick wire before testing. It is not allowed to use crocodile clips to clamp the solder pads for charging and discharging testing.
4. When selecting batteries, 18650, polymer, or ternary lithium batteries with a capacity of 4.15V/4.2V/4.35V/4.4V can be used. The capacity of a single string battery should not exceed 25000mAh, and the display of the battery level will be inaccurate if it exceeds the limit. Supports 3.65V lithium iron phosphate, but does not support disposable dry batteries, nickel hydrogen, nickel chromium, lead-acid batteries, etc. The battery should have a minimum of 2S and a maximum of 6S, and the total voltage should not exceed 23V. A single string battery needs to be able to charge and discharge a current of at least 10A. If this cannot be achieved, please reduce the power for use.
5. The motherboard must have a pre-set battery capacity, please refer to the details in the introduction
6. Supports Huawei Super Fast Charging, with different protocols having different power levels. 65W and 100W both refer to PD protocol power, while SCP has 22.5W. Please confirm your requirements before taking the photo. We do not accept returns if your phone cannot be charged quickly. Welded phones do not support returns or exchanges (the reason for not supporting phones is that their own protocols are not publicly available and cannot be used by third parties)
The battery connected to this motherboard must meet the requirements and be connected in series.
Package List:
Module * 1
100W PD QC Power Bank Bidirectional Fast Charging Mobile Power Module DIY Power Bank 2-6S Lithium Battery Protection Motherboard
$18.00
2-6S 100W PD QC Bidirectional Fast Charging Module DIY Mobile Power Motherboard Temperature Control Electricity Display
Product selling points:
1. MPPT solar charging: intelligently tracks the maximum power point, efficiently converts solar energy, and improves charging efficiency
2. Intelligent buck boost switching: automatically adjusts voltage to prevent overcharging damage to equipment, PWM/PSM dual-mode efficient operation
3. Multiple safety protections: comprehensive protection against overcurrent, overvoltage, short circuit, and overheating, ensuring worry free use
4. PD bidirectional fast charging: supports fast charging and discharging, significantly reduces self charging time, and is more convenient to use
5. Low ripple stable output: Solid state capacitor filtering, output ripple below 9mV, effectively protecting electronic devices
Product parameters:
Wire input: 4-26V; Can connect 2-6S series batteries
USB-A: 18W output, slow charging when plugged in at the same time
Type-C: 27-100W supports input and output
Product ripple:< 9MV
Module applicable: 4.2V/4.3V/4.35V/4.5V batteries of various specifications
For example: 4.2V 18650/polymer/ternary lithium battery/lithium iron phosphate battery
Support AFC fast charging protocol
Supports FCP/SCP protocol, Huawei can fast charge or super fast charge
Support PD3.1 input/output fast charging protocol
Supports Xiaomi fast charging and can also charge tablets
Integrated QC2.0/QC3.0/C3.0+output fast charging protocol
Other devices need to support QC protocol for fast charging, otherwise they cannot
matters needing attention:
1. The wires connecting the external battery of the motherboard must be able to withstand 10A current, using at least 1 square meter of copper wire, and ordinary wires should use 1.5 square meters. Being too detailed may pose safety hazards. Due to the high current at the battery end, it is recommended to use 16AWG wire.
2. The motherboard comes with a protective chip, and the battery cannot be further protected by a protective board. If necessary, please remove the protective board and directly connect the battery cells to our motherboard. (Because the built-in ones generally cannot have excessive current, and the output power is protected as soon as it increases)
3. Due to the excessive current at the battery end, it is necessary to weld the battery with a thick wire before testing. It is not allowed to use crocodile clips to clamp the solder pads for charging and discharging testing.
4. When selecting batteries, 18650, polymer, or ternary lithium batteries with a capacity of 4.15V/4.2V/4.35V/4.4V can be used. The capacity of a single string battery should not exceed 25000mAh, and the display of the battery level will be inaccurate if it exceeds the limit. Supports 3.65V lithium iron phosphate, but does not support disposable dry batteries, nickel hydrogen, nickel chromium, lead-acid batteries, etc. The battery should have a minimum of 2S and a maximum of 6S, and the total voltage should not exceed 23V. A single string battery needs to be able to charge and discharge a current of at least 10A. If this cannot be achieved, please reduce the power for use.
5. The motherboard must have a pre-set battery capacity, please refer to the details in the introduction
6. Supports Huawei Super Fast Charging, with different protocols having different power levels. 65W and 100W both refer to PD protocol power, while SCP has 22.5W. Please confirm your requirements before taking the photo. We do not accept returns if your phone cannot be charged quickly. Welded phones do not support returns or exchanges (the reason for not supporting phones is that their own protocols are not publicly available and cannot be used by third parties)
The battery connected to this motherboard must meet the requirements and be connected in series.
Package List:
Module * 1